Sunday 24 January 2016

DIY embroidered fox ring


Hello!
This time I have a diy for you. I was on pinterest when I saw this pin, and I immediately knew I wanted to do something like that so here is my idea.
For this diy you'll need:

I forgot to mention that you will need glue as well, it has to be strong glue because you don't want your ring to fall apart.
Step 1:
Embroider something. This can be anything you want, I chose to make a fox.
Step 2:
Cut out a cardboard oval which is bigger than you embroidered piece. I glued two pieces of cardboard together to make it sturdier.
Step 3:
Thread you needle with a colour that matches you fabric and cut out you embroidered piece.
Step 4:
Sew the fabric around the cardboard oval, you might want to cut away some access fabric before you do this. But be careful you don't cut away to much.
Step 5:
Glue the oval on your ring and your done!
 I hope you enjoyed this little diy, let me know if you have a particular diy you would like to see next!
x Senne

8 comments:

  1. This is adorable! I just found out you have started a blog, how exciting! Looking forward to your future posts! Xx

    ReplyDelete
    Replies
    1. Thank you so much! I'm glad you like it :) xx

      Delete
  2. This is adorable! I just found out you have started a blog, how exciting! Looking forward to your future posts! Xx

    ReplyDelete